SUPER-PAD CHARLY® Pack of 2

This unique and revolutionary design of pad incorporates several different layers, each with their own function, special fibres and a complex surface construction to enable results not previously obtainable from pad cleaning.
(Patent pending; No. 10253647.3.)


Integrated Suction Core - recovers soil from surface.
High duribillty - provided pads are used on even surfaces, each pad should clean up to 5,000 m² - very economical. Suitable for Cleaning:

ALL textile floor coverings:
Velour, loop pile, needlepunch, jute, sisal etc.
Hard floors
Fine stoneware, hard-stone flooring, Altro safety Flooring, studded rubber flooring etc. Mode of use:

Normally used with a rotary (160 - 240 rpm.)

Owing to its special suction core structure, the Super-Pads require special, detergent-free cleaning agents, e.g.

For textile floor coverings:
M-Power, Solution No. 2, Solution No. 4 or Solution No.9, dependant on fibre content and degree of soiling.
For cleaning hard and stone floors:
M-Power, Alkallo®, Kristallo® and Solution No.8 Fine Stoneware Cleaner CLEANER S should be used. Please note: Other products, particularly those containing detergents, destroy the function of the pad. Strongly acidic cleaners (e.g. pH 1-2) will, in prolonged use, impair the suction core structure of the pad.
Further Cleaning advice:

Always use the pad in pairs and work with a wet-mop trolley. One pad should be kept submerged at all times in clean water in one of the buckets. Before starting, squeeze the pad thoroughly (at least twice) from both sides. This squeezing determinates the moisture content of the SUPER-PAD CHARLY® (SPC). Thus, while one pad is in use, the other is kept submerged in the bucket ready for use. This procedure is necessary to allow the suction core sufficient time for efficient dirt release / relaxation.

Special Advice:

SUPER-PAD CHARLY® (SPC) is a pad for wet cleaning that absorbs moisture and soiling. For cleaning textile floor coverings the monobloc machine should not be placed on the pad until the work is ready to be started, otherwise the weight of the machine will press dirt and water into the substrate. This also applies when the machine is not in use. It is advisable to start work in the middle of the area to be cleaned - not at the edges - because this procedure leads to a more even appearance of the substrate.
The cleaned textile surface will be passable after approx. 20-45 minutes, depending on the moisture content of the pad and the air humidity. After a week of intensive use the pad should be machine-washed (40°C) without the use of a softener. We also recommend this machine-wash if tenacious stains and dirt remain in the pad or when a different substrate chemical is used. Any residues of previously used cleaning agents should be thoroughly washed out in order to avoid damage to sensitive surfaces. It is, therefore, advisable to work with two sets of two pads each., i.e. one set for cleaning textile floor coverings and one for hard surfaces and stone floors. Should the pad become covered with fluff, simply brush off. Owing to the special structure of its back, the SPC requires a full function disc that ensures sufficient adhesion. After several applications the SPC becomes softer and more flexible and can be better squeezed. A machine wash at 40°C before the first use leads to the same effect.

Coverage/Durability/Storage:

In exposed, free areas it is possible to treat 80m²/hour. The pads are normally durable for up to 5,000 m², but may have a shorter life when they are subjected to greater mechanical stress, e.g. in the cleaning of structured tiles (security tiles or uneven surfaces). A special plastic box with ventilation holes has been developed for SUPER-PAD CHARLY® (SPC). Since the pad requires up to two days to completely dry out it is necessary to ensure a constant air flow to prevent the formation of mildew stains.

All recommendations are based on practical experience, but should be modified, if necessary, to conform with different practice conditions. We cannot claim to serve in any but an advisory capacity and can undertake no liability. Tests should be carried out in each individual case before the work is started.